As for the headlight covers and surrounds they are fine, but very time consuming to cut to shape and also very difficult to be accurate. I have done the outside circumference of the surround, so that Wayne could see how they fit to the recesses built into the front clip. Used the old dremel, but you have to be really careful.
I am dreading doing the inside cut on the outside ring that gets chromed, as we all know, chroming, whether metal or hydro, will show up any imperfections.
They have done it from the same vac form moulding so you get two sets. Both like the moulding you get an Easter Egg in. One has the outside ring scribed on it, so the bulbous bit is just cut out and discarded, and the other the bulbous bit is the bit you want....if you see what I mean.
I think DNA silicone them in when finished, but I have been trying to come up with an alternative to such a permanent fit. I thought about magnetic strips, or industrial strength velcro.....but it's making sure they don't fall off, and that they remain waterproof....maybe Velcro with a small section P seal would work....or even a flat seal....I don't know, will have a fiddle when I get it back.