Author Topic: New 360 build  (Read 162935 times)

360MKbuild

  • Sr. Member
  • ****
  • Posts: 464
  • Karma: +3/-0
    • View Profile
Re: New 360 build
« Reply #645 on: July 22, 2018, 09:19:14 AM »
Not sure I would sell it guys, maybe once I’ve sorted the 360 cover out. Limited time on the car this weekend but worked on the rear handbrakes. Barry had made a jig a while back so the whole carrier etc was easier to work on in the vice. Was a case of making sure the caliper missed all other components. The template has been made and passed onto the engineer. Once the adapters are back they just need powdercoating and fitting to the car. Another tricky part of the build done

Lee22

  • Hero Member
  • *****
  • Posts: 1066
  • Karma: +6/-2
  • ...
    • View Profile
Re: New 360 build
« Reply #646 on: July 22, 2018, 06:18:54 PM »
Nice mate

Look amazing on the discs like that.
That bracket that Barry mocked up was a great fit, and works a treat.
Just shows you how tight things are though when you look carefully at where the callipers sits..  :o

360MKbuild

  • Sr. Member
  • ****
  • Posts: 464
  • Karma: +3/-0
    • View Profile
Re: New 360 build
« Reply #647 on: July 22, 2018, 08:48:53 PM »
Your not kidding it’s seriously tight but only place it could go, ideally would of liked it at 7pm position like the genuine cars but no chance due to space etc.

Another big thanks to lee for sorting out a front brace. With a bit shaved off the bonnet catch we were able to get it to fit :D BUT this was only because my bonnet catch is different to others as its shorter. Lee has checked measured on his and it won’t work without modifying. Going to get the brace powdercoated Black (sorry lee) and then fit the flocked covers in which will hide a majority of the brace.

360MKbuild

  • Sr. Member
  • ****
  • Posts: 464
  • Karma: +3/-0
    • View Profile
Re: New 360 build
« Reply #648 on: August 09, 2018, 08:46:27 PM »
Works are now done to the rear bumper, we had to cut out additional vents in the diffuser so the intercooler heat can escape, also cut out for the new anti roll bar.  The hole in the diffuser for the mr2 cat has been fibreglassed back in as the hole is no longer needed. Barry has designed and fabricated a rear frame that secures the bumper, intercooler and the rear deck brackets. This means no flex in the rear of the car. The frame has been made so it can be unbolted, but also just the bumper can be removed so access is easier for maintenance. Amazing work. The rear bumper has been repainted and just the mesh to fit at the weekend.

360MKbuild

  • Sr. Member
  • ****
  • Posts: 464
  • Karma: +3/-0
    • View Profile
Re: New 360 build
« Reply #649 on: September 16, 2018, 04:36:02 PM »
The intercooler pipe work is all in, just tack welded for now until exhaust is finished. Then all pipes being sent away for welding and ceramic coating. The remaining interior parts are back from being flocked along with the front bin and plastics. Also collected are the sill plates from Wayne’s. Yet again top work from Wayne  8)
« Last Edit: September 16, 2018, 04:51:13 PM by 360MKbuild »

360MKbuild

  • Sr. Member
  • ****
  • Posts: 464
  • Karma: +3/-0
    • View Profile
Re: New 360 build
« Reply #650 on: September 16, 2018, 04:37:26 PM »
.

Georgelooney

  • Sr. Member
  • ****
  • Posts: 292
  • Karma: +1/-0
    • View Profile
    • My Build
Re: New 360 build
« Reply #651 on: September 16, 2018, 06:34:13 PM »
Looking incredible as always Mark
Follow my build on instagram @ https://instagram.com/theperrari?r=nametag

360MKbuild

  • Sr. Member
  • ****
  • Posts: 464
  • Karma: +3/-0
    • View Profile
Re: New 360 build
« Reply #652 on: October 15, 2018, 08:58:03 PM »
Rear Ferrari handbrakes now fitted along with the 4 pot callipers. Using Ferrari handbrake cables that Barry has cleverly modified with adjusters to fit the 360 handbrake lever I fitted  ;D

Georgelooney

  • Sr. Member
  • ****
  • Posts: 292
  • Karma: +1/-0
    • View Profile
    • My Build
Re: New 360 build
« Reply #653 on: October 15, 2018, 09:07:53 PM »
Top notch work Mark  :o
Follow my build on instagram @ https://instagram.com/theperrari?r=nametag

OXO

  • DNA Owner
  • Full Member
  • *
  • Posts: 142
  • Karma: +1/-1
    • View Profile
Re: New 360 build
« Reply #654 on: October 16, 2018, 08:42:43 AM »
WOW ! it's coming on now. Can't wait to see the finished article.

beemaman

  • Hero Member
  • *****
  • Posts: 2029
  • Karma: +7/-1
  • theres only one way to build
    • View Profile
Re: New 360 build
« Reply #655 on: October 16, 2018, 08:06:40 PM »
First class as always mark and quality work :)

360MKbuild

  • Sr. Member
  • ****
  • Posts: 464
  • Karma: +3/-0
    • View Profile
Re: New 360 build
« Reply #656 on: December 16, 2018, 07:20:22 PM »
As I’m waiting for work to continue on the car I’ve been sorting some more bits out. Lots of hunting on the net I managed to pick up (with some help negotiation) a complete unused tool kit and a tyre inflator cannister with bag. Got them at a crazy low price and couldn’t say no. Just waiting for the straps to arrive this week and collect the bracket from the engineers. Both the tool kit and inflator brackets will be flocked the same as the tub. Going to move the alarm to the outside as others have done. Yep there’s no space left in the tub but not an issue for me. I’m moving the washer bottle again. I’ve scrapped the mr2 one as there’s just no space to fill and it’s covered by half the wing. Ive purchased a 360 filler neck to use. This will be located further down the tub surround. I have a few ideas on which washer container to use just need to do some more measuring this week.

360MKbuild

  • Sr. Member
  • ****
  • Posts: 464
  • Karma: +3/-0
    • View Profile
Re: New 360 build
« Reply #657 on: December 16, 2018, 07:21:09 PM »
.

Lee22

  • Hero Member
  • *****
  • Posts: 1066
  • Karma: +6/-2
  • ...
    • View Profile
Re: New 360 build
« Reply #658 on: December 17, 2018, 10:06:41 AM »
That’s some impressive gear there Mark...!

Nice to see some attention to detail on the build with accessories 👍🏻

OXO

  • DNA Owner
  • Full Member
  • *
  • Posts: 142
  • Karma: +1/-1
    • View Profile
Re: New 360 build
« Reply #659 on: December 17, 2018, 10:38:28 AM »
Fantastic attention to detail as always Mark.
Lets hope you might get the car finished sometime soon........... Can't wait.