I've been continuing to work on the roof, unfortunately I've hit a problem that has stopped me in my tracks.
The rear buttresses need to fold in and turn upside down to tuck away. First I don't have the room for the mechanics (raw mechanism made up, then removed, I had to repair the cut aways on the seatbelt brace when I installed the acme screw feeds and then removed them!)
So I'm back to having to manually fold them away.
My problem is that I sold my roof about 4years ago with the fibre glass panels, so here I am making new ones...
I placed a modelling clay 3mm spacer under the mould to allow for material when it sits in a pocket, the steel reinforcing also gives me something to weld to for the rear hook and strap bar, I'll show it done next week when I cast the other fibreglass part. I've fabricated a ladder type support for the rear window and mohair, this will be wrapped in tesa tape to soften it for the pocket.