Author Topic: Cheets 430  (Read 93240 times)

cheets

  • Hero Member
  • *****
  • Posts: 744
  • Karma: +3/-0
    • View Profile
Cheets 430
« on: November 07, 2013, 09:00:49 PM »
Hello Gents

Well were do i start i have bin on hear for at least 2 years looking at all your build threads. Ok i have bin to DNA to day and yes i have dun it  handed over a deposit :)

It is not going to be a fast build as a work a way so planing to get the the kit in march but hoping to have enough time on it be for then so i can get the kit just sat on it. Then the next time i am going to be home will be in August so will hope to have the body bonded on the Mr2 but as i have seen on hear i am shore that will change  lol .


But i have bin busy the last 2 weeks

Mr2 stript
suspension stript
colale over fitted
Poly bush fitted
wheal arch tapt in well one left to do
brakes new seals
new brake discs

got front wish bone from DNA to day but need to get the bottom ball joint
Moving Mr2 to morrow so i can do the other wheal arch 

Of back to work next monday so can start wen i get back in 2 weeks

ok let me see if i can now get some pics on hear 
 
Mark  ;D

cheets

  • Hero Member
  • *****
  • Posts: 744
  • Karma: +3/-0
    • View Profile
Re: Cheets 430
« Reply #1 on: November 07, 2013, 09:23:50 PM »
pic 1 / 2 the Mr2
pic 3 / 4 striped

cheets

  • Hero Member
  • *****
  • Posts: 744
  • Karma: +3/-0
    • View Profile
Re: Cheets 430
« Reply #2 on: November 07, 2013, 09:44:01 PM »
Pic 1 striping the front
pic 2 / 3 striping the rear
pic 4 taping back the arch

cheets

  • Hero Member
  • *****
  • Posts: 744
  • Karma: +3/-0
    • View Profile
Re: Cheets 430
« Reply #3 on: November 07, 2013, 09:53:58 PM »
Pic 1 coil overs
Pic 2 / 3  i needed to pit a new bush and fond out that they don't do one for there :( well a bit a ringing a bout i fond one that would do its 3 mm smiler on the length but it works with a washer to space it out

pic 4 bush in with poly bush as well

cheets

  • Hero Member
  • *****
  • Posts: 744
  • Karma: +3/-0
    • View Profile
Re: Cheets 430
« Reply #4 on: November 07, 2013, 09:56:46 PM »
Pics 1 / 2 / 3 in red led

cheets

  • Hero Member
  • *****
  • Posts: 744
  • Karma: +3/-0
    • View Profile
Re: Cheets 430
« Reply #5 on: November 07, 2013, 10:02:29 PM »
Pic 1 front coil over and hum back on
Pic 2 rear coil over and hum back on
Pic 3 rear coil over and hum and braks 

cheets

  • Hero Member
  • *****
  • Posts: 744
  • Karma: +3/-0
    • View Profile
Re: Cheets 430
« Reply #6 on: November 07, 2013, 10:05:14 PM »
Manifold fitted and it you have noticed i have gone mad wight the satin black lol

Mark :)

rudycob1

  • Hero Member
  • *****
  • Posts: 1072
  • Karma: +4/-1
    • View Profile
Re: Cheets 430
« Reply #7 on: November 07, 2013, 11:01:27 PM »
Nice detailed work.
Looking good.

crossy

  • Hero Member
  • *****
  • Posts: 567
  • Karma: +0/-0
  • Don't you just love traffic cops!
    • View Profile
    • Collagen Light Therapy and Sunbed Hire & Sales
Re: Cheets 430
« Reply #8 on: November 08, 2013, 08:24:18 AM »
Great to get all your lower arms painted up before you start, wish I'd done that with my build! Welcome to the DNA forum where you'll find lots of help and advice when you need it with your build.  :)
Hoping to enjoy half an hour in heaven..........before the devil knows I'm dead!

Paul79

  • Hero Member
  • *****
  • Posts: 1417
  • Karma: +2/-1
    • View Profile
Re: Cheets 430
« Reply #9 on: November 08, 2013, 10:40:10 AM »
Welcome Mark, nice to see another 430 build going on. To echo what Crossy said  any issues/questions you have, ask the question on your build thread, and hopefully you'll have the answer within hours. Helps future readers as well.  I should know, I've done it enough times on my build  ;D. Where are you based? looks a lovely idyllic setting, all those fields!

cheets

  • Hero Member
  • *****
  • Posts: 744
  • Karma: +3/-0
    • View Profile
Re: Cheets 430
« Reply #10 on: November 08, 2013, 07:38:59 PM »
Thanks i am shore i will be call on some help with the build  :)

 Paul i live in Burnley but at the mow i am working in Rio so not to shore how long the build is going to take

Ok what i have got dun to day

Pic 1  2 new steering rack boots
Pic 2 started to markout for were i was going to cut  and i was missing the bits that shod be in the pic 2 i had left them on the rear wing see pic 3 were i have cut and panted it
Pic 4 the tops of the cut and in red led

cheets

  • Hero Member
  • *****
  • Posts: 744
  • Karma: +3/-0
    • View Profile
Re: Cheets 430
« Reply #11 on: November 08, 2013, 07:47:40 PM »
Pic 1  the in side of the of the door i have ground along the seem panted in red led
Pic 2 the top folded over and panted
pic 3 i have fond an easy way of getting the Toyota markings off the glass :) 

Paul79

  • Hero Member
  • *****
  • Posts: 1417
  • Karma: +2/-1
    • View Profile
Re: Cheets 430
« Reply #12 on: November 08, 2013, 08:54:11 PM »
Good work Mark, while the car is all bare, it may be a good idea to cut off this piece of metal each side of the rear of the car (see circle in picture below) , as I and Phil found it gets in the way of the exhaust when you come to fit it. I unfortunately had already bonded on the rear, so to cut it off was and absolute pain in the bum as it was very difficult to get the angle grinder in there. But if there is no kit on it is easy. It doesn't seem to serve any purpose than to get in the way. It was where the rear arches attached to on the MR2 i believe.

HTH

Paul


beemaman

  • Hero Member
  • *****
  • Posts: 2012
  • Karma: +7/-1
  • theres only one way to build
    • View Profile
Re: Cheets 430
« Reply #13 on: November 08, 2013, 09:04:49 PM »
Nice detail buddy its also whats under the car that matters so doing all this works and looks new and clean.

Great work buddy :)

cheets

  • Hero Member
  • *****
  • Posts: 744
  • Karma: +3/-0
    • View Profile
Re: Cheets 430
« Reply #14 on: November 08, 2013, 09:21:42 PM »
Thanks for that pall i will do that on Sunday think it will be my last job be for i go of to work lol

Thanks beemaman yes the idea is to make the motor as new as i can from the bits you can see and bit you can not have already lost count home many tins of satin black and red led i have gone throw :)

i need to start getting nuts and bolts has anyone got a list of what i would need ?


 

Advert

SMF spam blocked by CleanTalk